BRAIN BOX RESET- WHEN RED LIGHT IS FLASHING

For all 1999 or newer spa ’s except Vista, Envoy, or Caspian’s.

#1) Shut down both breakers

#2) Remove filters and put filter caps back onto standpipe’s.

#3) Turn on 20 AMP breaker, leave this on for 30 minutes.

#4) Turn 20 AMP breaker off, for 10 minutes.

#5) Turn 20 AMP breaker back on.

#6) IF FLASHING STOPS…Turn on 30 AMP breaker.

#7) Leave filters out until spa comes up to temperature.

If spa does not heat up, you may need to reset your heater.

For Vista, Envoy and Caspian’s.

#1 & #2) Same as above

#3) Turn on 30 AMP breaker for 30 minutes.

#4) Turn 30 AMP breaker off for 10 minutes.

#5) Turn 30 AMP breaker back on.

#6) If Flashing has stopped, put 20 AMP breaker on.

#7) Same as above.